fs_height_offset

If you find that your feet are in the ground - or conversely that you are floating above the ground, you can adjust your height to get yourself back where you should be.

There are two ways to do this:

• Method One: Use the newer Hover Height adjustment:
  • Either: Right click your avatar, select Appearance, then Hover Height. A window opens. Use the slider to adjust your height above the ground, then close the window.
  • Or: go to Quick Prefs > Hover Height, and adjust the slider there.
    
    
  • Note: RLVa is able to control this setting. If you find the setting changing apparently on its own, and you use RLV, one of your attachments may be adjusting the setting. Go to the RLVa menu → Debug → Show Debug Messages, and enable that setting. You will now see lots of “owner say” messages starting with “@….” One of them will most likely be @adjustheight:-0.2345=force or similar. This will tell you what attachment is controlling the setting.

• Method Two:
  • Use the old setting in your Shape: Right click yourself, select Appearance → Edit Shape. In the Body tab, scroll down to Hover. Adjust the value till your feet are touching the ground. Save changes by clicking the Save button.
    Naturally, your shape must be moddable for this to work. ¹⁾
  • Note: In general, it is best to leave this setting at 50 (the default value) since the setting has been deprecated. Values other than 50 sometimes cause erratic hover problems.
  • You can find some useful tips at I Was Floored: Frequently Asked Support Question.