fs_movement_issues

If you can turn in circles but not move forward/backwards, you probably have Movelock enabled.

• Go to the Avatar menu→ Movement submenu and make sure Movelock is not ticked.
• See Movelock info for more information or if you are unable to change the Movelock setting.

However, there are a few other things to try:

• Go to a different region and see if you are able to move there. If so, something at your original location is causing the problem.
• If you are using a LAQ mesh head, make sure you don't have the Pose feature turned on.
• Make sure you don't have some other HUD with a pose feature.
• If you can't find what attachment is causing the problem, try going to Advanced menu (Ctrl-Alt-D ) → Release Keys.
  • Note: Release Keys will be greyed out if RLV has locked any of your attachments. To disable RLV, go to Prefs → Firestorm → Extras, untick the top item, and then relog.
• Make sure you don't have the Firestorm pose stand active.
  • If you have the Pose Stand button on your toolbar, make sure it's not “on.”
  • If you don't have the button, go to Avatar menu → Toolbar Buttons, drag the Pose Stand button out to your toolbar, and make sure it's not “on.”

• Try Avatar menu → Avatar Health → Stop Animations & Revoke Permissions.
• Try right clicking your avatar → Reset Skeleton & Animations.
• If the above two items did not work, go to a different region and try them again.
• If you have the animation in your inventory, play it from inventory, then click Stop.
• Remove attachments one by one until the animation stops. (This will eliminate worn items as a cause.)
  • Note: Animations can be in ANY attachment.
  • Note: Attachments are anything with a box icon. Look in Inventory → Current Outfit folder to see all your attachments.

• Make sure the Firestorm AO is off:
  • On the AO button on your toolbar, untick the checkbox.
  • Note: The Firestorm AO can be active even if the button is not on your toolbar. If it is not on your toolbar, go to Avatar menu → Toolbar Buttons, drag the AO button out onto your toolbar, and make sure it is not ticked.

• If you know that a “sittable” item gave you the animation:
  1. Go to Preferences → Firestorm → Protection → Revoke Permissions.
  2. Temporarily set this to “Revoke on Sit and Stand.”
  3. Sit on the item, then stand. This should stop the animation.
  4. Change Preferences → Firestorm → Protection → Revoke Permissions back to either “Never” or “Revoke on Stand.”

• Try Advanced menu → Release keys. (After doing this, you will need to recreate the FS bridge: Avatar → Avatar health → Recreate LSL Bridge.)

• You may simply be experiencing lag: See Troubleshooting Lag for tips to reduce this.
• Many pose balls will request permission to animate you. If you did not see the animation request, look in your Notifications window for the message. Click “Accept.”
• Make sure you have not blocked the item or its owner: Look in Comm menu → Block List, see if the item or the item's owner is there, and remove the item/person from the block list.
• Go to Preferences → Firestorm → Protection → Revoke Permissions. For normal use, this should be set to either “Normal” (no protection) or “Revoke on Stand.” It should normally NOT be set to “Revoke on Sit” or “Revoke on Sit and Stand,” as both of these will prevent items from animating you when you are sitting.

“Rubber-banding” is when you try to walk forward and then suddenly snap back to a previous position. Sometimes you will seem unable to stop walking. This is caused by region lag, when the server can't keep up with processing avatar movement (collisions).

• For info about region lag see here: Region Lag
• For some things that region or parcel owners can do to reduce region lag see here: Reducing Server Lag.

This typically happens when you have two or more conflicting AOs (animation overriders) on.

• Start by removing known AOs until you are wearing only one known AO.
• If that doesn't help, start by removing other HUDs, then all other attachments, one by one, until it stops. Any worn item can contain an animation, so don't assume that some items are “ok.”
• Note: Attachments are anything with a box icon. Look in Inventory → Current Outfit folder to see all your attachments.

• Try turning the opposite direction to the spin.
• Try pressing BOTH right and left arrow keys at the same time, repeatedly.
• Relog.

This is a possible bridge problem: recreate bridge by going to Avatar menu → Avatar Health → Recreate LSL Bridge.

This is a possible bridge problem: recreate bridge by going to Avatar menu → Avatar Health → Recreate LSL Bridge.

For unknown reasons, some users need to change an additional setting:

Go to Preferences → Privacy → Lookat, and tick “Don't Send My Selection Target Hints.”

• In most cases, pressing Ctrl-R to toggle run mode will get you back into walk (though it may in some cases be necessary to hit Ctrl-R more than once).
• If you are wearing a scripted AO (animation overrider), turn off any “running” features it has.
• If you are using the Firestorm built-in AO (animation overrider), make sure there are no running animations in the “Walking” or “Standing” categories.

After Strafe

Ref. BUG-6825

In one specific case, the above will not work. Specifically:

• You have Preferences → Move & View → Movement → Tap-tap-hold to run enabled.
• Press shift, then tap-tap-hold the left or right arrow key

That gets you running sideways. If you release shift before the arrow key, you will be stuck running.

To stop running, you have to repeat the sequence: press shift, then tap-tap-hold left or right arrow.

This is a known SL bug also affecting the SL viewer. Refer to this SL bug report for more information.