• Account: will prompt you to open your SL dashboard in a web browser
• Marketplace Listings: Manage your SL marketplace listings.
• Buy L$: opens the floater to let you buy L$
• Inventory (Ctrl-I): opens your inventory
• Picks: opens the Picks and Classifieds window for creation and editing of picks and classified ads.
• Experiences: opens the Experiences window.
• Profile: opens your profile
• Appearance: opens the appearance floater at My Outfits (will be greyed out if you are a cloud; see here if that has happened to you)
• Choose an avatar: opens the Choose an Avatar window.
• Movement: opens the movement sub menu where you can set
  • Sit down (Alt-Shift-S): will sit your avatar down (not available if already sitting)
  • Fly (Home): this toggles will turn on fly mode (not available if sitting)
  • Stop Flying (Home): this toggle will turn off fly mode.
  • Always Run (Ctrl-R): toggles run
  • Force Ground Sit (Ctrl Alt S): This forces your avatar into a ground sit regardless of where your avatar is.
  • Move Lock (Ctrl-Alt-P): When enabled, will lock your avatar in place so it cannot be pushed.
    You will not be able to move yourself either, unless you enable Preferences→ Move & View -> Movement→ Lock and unlock position after stopping or starting movement.
  • Quickjump: If enabled, the viewer suppresses any pre-jump animation.
• Move Controls: toggles the movement controls floater
• Camera Controls: toggles the camera controls floater
• Avatar Health: opens the Avatar Health sub menu
  • Stop avatar animations: used to stop animations acting on your avatar
  • Stop avatar animations & revoke permissions:
  • Undeform Avatar: Attempts to undeform your avatar, to recover its normal shape after deformation after the use of oversized avatars or griefer objects.
  • Force appearance update (Rebake)(Ctrl-Alt-R): rebakes your avatar's textures
  • Refresh Attachments: In cases where attachments are “ghosted”, it will attempt to reattach them. Ghosted attachments are those that shows attached to you but others don't see them.
  • Reset Default Male Avatar (Character Test): forces your avatar to the default male
  • Reset Default Female Avatar (Character Test): forces your avatar to the default female
  • Show Avatar Complexity Information:
  • Lag Meter: Opens the Lag Meter window.
  • Recreate LSL Bridge: creates a fresh copy of the LSL bridge
• Snapshot (Ctrl-Shift-S): opens the snapshot floater
• Money Tracker: Shows a list of who last paid you; see this page for more information.
• Pose Stand…: Open the Pose Stand window; replicates the functionality of a pose stand.
• Preferences (Ctrl-P): opens your preferences window
• Toolbar Buttons: Opens the toolbar buttons window, allowing the button layout to be customized.
• Show HUD Attachments (Alt-Shift-H): Shows all HUDs that you have attached
• Exit Firestorm (Ctrl-Q): Closes Firestorm

• Online Status: opens the Online Status sub menu where you can set yourself to:
  • Away
  • Unavailable (Busy)
  • Auto-respond: (the auto-response messages are set in Preferences→ Privacy -> Autoresponse)
  • Autorespond to non-friends
  • Reject teleport offers and requests
  • Reject all group invites
  • Reject all friendship requests
• Friends (Ctrl-Shift-F): opens the Friends tab in the contacts list.
• Contacts (Ctrl-Alt-Shift-F): Opens or closes the contacts list.
• Contact Sets (Ctrl-Alt-Shift-C): opens the Contact Sets window, to manage your own groups of contacts
• Groups (Ctrl-Shift-G): opens the Groups tab in the contacts list.
• Chat (Ctrl-H): opens the nearby chat tab in the Conversations window
• People: Opens the people window.
• Conversations (Ctrl-T): opens the Conversations window
• Gestures (Ctrl-G): opens the Gestures window
• Facebook…: opens the Post to Facebook window.
• Twitter…: opens the Twitter window.
• Flickr…: opens the Upload to Flickr window.
• Voice Morphing:
  • No voice morphing: Enables/Disables voice morphing provided you are already subscribing to Linden Lab's voice morphing.
  • Preview: Opens the Voice Morphing Preview window.
  • Subscribe: Opens the Second Life Voice Morphing web page.
• Conversation Log: Opens the Conversation Log window.
• Nearby Voice: opens nearby voice, aka active speakers
• Block List: opens the people window → Block List

• Resync Animations: Restarts animations within your view; this allows couples dances to be resynchronized.
• Nearby Avatars (Ctrl-Shift-A): Opens the Nearby tab in the People window.
• Radar: Opens the Radar window.
• Teleport History (Alt-H): Opens the Places window, teleport history tab.
• Places: Opens the Places window.
• Destinations: Opens up Destination window.
• Events: Opens the SL Events web page.
• Mini-Map (Ctrl-Shift-M): Opens the Minimap
• World Map (Ctrl-M): Opens the World Map
• Region Tracker: Opens the Region Tracker window.
• Landmark This Place: Creates a landmark of your current location
• Location Profile: Opens the Places Profile window
• Parcel Details: Opens the About Land window
• Region Details: Opens the Region/Estate window
• Buy This Land: oOpens the Buy Land window (If you are on land that is not for sale, this will be greyed out)
• Show Owned Land: Opens the Owned Land window
• Show More: opens the Show More sub menu where you can chose to show
  • Ban Lines Enables or disables the ability to see ban lines around parcels to which you are not allowed access.
  • Beacons (Ctrl-Alt-shift-N) Hide/show beacons for some types of objects, like sound sources, particle sources, and so on.
  • Property Lines (Ctrl-Alt-Shift-P) Enables or disables showing lines at property boundaries.
  • Land Owners Colors land: Green is land owned by you, red is land owned by others, yellow is land for sale.
  • Coordinates: Shows your current coordinates in the menu bar
  • Parcel Permissions: Shows icons of your parcel rights
  • Advanced Menu (Ctrl-Alt-Shift-D): Hides/shows the Advanced Menu. This can also be done in Preferences→ Advanced.
• Teleport Home (Ctrl-Shift-H): teleports you home
• Set Home to Here: sets your home location to the point you are at; also saves a snapshot, which will be displayed when you log in to your home location.
• Sun Position: opens the Sun Position sub menu, where you can set the sun position to
  • Sunrise (Ctrl-Shift-U)
  • Midday (Ctrl-Shift-Y)
  • Sunset (Ctrl-Shift-N)
  • Midnight (Ctrl-Shift-X)
  • Estate Time
• Environment Editor: (Photographers might prefer that fast access available in QuickPrefs or Phototools) This has these sub-menus:
  • Environment Settings: Opens the environment settings window.
  • Water Presets: has sub-menus to allow water presets to be created, edited, deleted.
  • Sky Presets: has sub-menus to allow sky presets to be created, edited, deleted.
  • Day Presets: has sub-menus to allow day presets to be created, edited, deleted.
• Photo and Video: opens the submenu for
  • Phototools (Ctrl-Alt-P): opens the Phototools floater.
  • Cameratools (Ctrl-Alt-C): opens the Cameratools floater.
• Area Search: Opens the Area Search window
• Sound Explorer: Opens the Sound Explorer window.
• Animation Explorer: Opens the Animation Explorer window.
• Asset Blacklist: Opens the Asset Blacklist Window.
• Avatar Render Settings: Opens the Avatar Render Settings window.
• Always show Friends normally: This will show all friends as normally rendered avatar instead of a “jelly doll” image.
• Show Friends only: This will temporarily derender all avatars except those on your friends list. If you leave Preferences→ Move & View -> Teleports→ Keep 'Show Friends Only' enable after teleporting disabled, then this option will disable itself after teleport.

• Build (Ctrl-B): opens the Build/Edit window
• Select Build Tool: opens the Build Tool sub menu where you can select
  • Focus Tool (Ctrl-1)
  • Move Tool (Ctrl-2)
  • Edit Tool (Ctrl-3)
  • Create Tool (Ctrl-4)
  • Land Tool (Ctrl-5)
• Link (Ctrl-L): will link multiple prims
• Unlink (Ctrl-Shift-L): will unlink prims in a linkset
• Edit Linked Parts: allows you to edit individual prims in a linkset
• Select Elements: opens the Select Elements sub menu where you can choose:
  • Select Next Part (Ctrl-.)
  • Select Previous Part (Ctrl-,)
  • Include Next Part (Ctrl-Shift-.)
  • Include Previous Part (Ctrl-Shift-,)
• Focus on Selection (H): will focus your camera on an object you have selected
• Zoom to Selection (Shift-H): will zoom your camera on an object you have selected
• Object: opens the Object sub menu that allows you to:
  • Take: Takes the object back to inventory
  • Take Copy: Creates a copy of the object in inventory.
  • Duplicate (Ctrl-D): Creates a duplicate of the object next to the original object.
  • Edit Particles: Opens the Particle Editor.
  • Save Back to Object Contents If you drag the contents of an object directly onto the ground (rather than into your inventory first, then out onto the ground), and make changes to it, this function allows those changes to be saved back to the original object.
  • Return Object Returns the object to the owner.
  • Save as:
    • Backup: Opens the Backup window, allowing you to save the object to your hard drive.
    • Collada: Opens the Collada Export window, which you can use to export the object as mesh.
• Scripts: opens the Scripts sub menu where you can:
  • Show Script Warnings/Errors
  • Script Info (Counter): If the object is moddable, this will show script information for it.
  • Recompile Scripts (Mono)
  • Recompile Scripts (LSL)
  • Reset Scripts: this will only work if the object is moddable.
  • Set Scripts to Running
  • Set Scripts to Not Running
  • Remove Scripts from Selection: If the selected object is moddable, removes all scripts from it.
• Pathfinding: Options concerning Pathfinding.
  • Region Objects: Opens the Region Objects window.
  • Characters: Opens the Pathfinding characters window.
  • View / Test: Opens the Pathfinding console.
  • Rebake Region: Rebakes the region NavMesh, if there are pending changes - assuming you have rights to do so and Pathfinding is enabled for the region; will by greyed out otherwise. This can also be done by clicking the Pathfinding icon in the top menu bar.
• Options: opens the Options sub menu where you can:
  • Show Advanced Permissions: Refer to this SL Wiki page for more on Advanced (Debug) permissions.
  • Select Only My Objects
  • Select Only Movable Objects
  • Select Only Locked Objects
  • Select Only Copyable Objects
  • Select By Surrounding
  • Include Group-Owned Objects
  • Show Physics Shape When Editing
  • Show Selection Outlines (Ctrl-Alt-H)
  • Show Hidden Selection
  • Show Light Radius for Selection
  • Show Selection Beam
  • Snap to Grid (G)
  • Snap Object XY to Grid (Shift-X)
  • Use Selection for Grid (Shift-G)
  • Grid Options (Ctrl-Shift-B)
  • Set Default Permissions: Opens the Default Creation Permissions window.
• Upload: opens the Upload sub menu which allows you to choose what to upload (Same as the Upload item in the Avatar Menu):
  • Image (L$10): Opens a file selector, then the image upload window.
  • Sound (L$10): Opens a file selector, the the sound upload window.
  • Animation (L$10): Opens a file selector, then the animation upload window
  • Mesh Model: Opens a file selector to upload a mesh model; see the SL wiki for more info.
  • Bulk (L$10 per file): Opens a file selector where you can select multiple image files for upload.
  • Import Linkset: Opens the Import window, to upload a previous exported object.
• Undo (Ctrl Z): will undo the last changes made in the edit /build window
• Redo (Ctrl Y): will redo the last changes made with the undo command

• Search (Ctrl-F): opens the Search window
• SL Marketplace: prompts you to open the Marketplace web page
• L$ Market Data: prompts you to open the L$ market Data web page
• Script Library: prompts you to open the Script Library web page
• Firestorm Blog: prompts you to open the Firestorm Viewer Home web page
• Firestorm Flickr: prompts you to open the Firestorm Viewer Flickr web page
• Firestorm YouTube: prompts you to open the Firestorm Viewer YouTube channel
• Firestorm Twitter: prompts you to open the Firestorm Viewer Twitter web page
• Firestorm Plurk: prompts you to open the Firestorm Viewer Plurk web page
• Message of the day: this will show the message of the day in local chat. This also is shown during the login phase.

• Enable Viewer UI Hints: enables the tooltips on objects; this can also be done in Preferences→ User Interface -> General→ Hover tips.
• Firestorm Wiki (F1): opens the Firestorm Wiki page
• Troubleshooting: opens the Firestorm Troubleshooting and Quick Fixes Wiki page
• Join Firestorm Support Group: opens a window listing in-world support groups you can join, to get help.
• Firestorm Classes Schedule: opens the Firestorm Class Schedule page.
• Check Grid Status: opens the Grid Status web page
• Report Abuse: opens the Abuse Report window
• Report Bug: opens the "how to file a JIRA" page on our Wiki
• Bumps, Pushes & Hits: opens the |pushes and bumps window
• Enable Sysinfo Button: enables a button in IM window that lets you send your sysinfo
• About Firestorm: opens the About Firestorm window

This menu is toggled from Advanced Menu (Ctrl-Alt-D) → RestrainedLove API (RLVa) or from Preferences → Firestorm → Extras → Allow Remote Scripted Viewer Controls (RLVa). This will require a restart of the viewer to show this menu.

• Debug: Opens the Debug sub menu where you can enable:
  • Show Top-level RLVa Menu: Enables showing the RLVa menu in to menu bar. If disabled, RLVa menu will show in Advanced Menu.
  • Show Debug Messages: Used when debugging RLV scripts and also to know when something RLV is being done to you by either a person or object.
  • Hide Unset or Duplicate Messages
  • Show Assertion Failures
  • Hide Locked Layers
  • Hide Locked Attachments
  • Enable Legacy Naming
  • Enabled Shared Wear
  • Rename Shared Items on Wear
  • Locks: Opens the Active RLV Locks window
• Allow OOC Chat: Allows Out Of Character (OOC) chat.
• Allow Temporary Attachments
• Forbid Give to #RLV
• Show Filtered Chat
• Wear Replaces Unlocked
• Console: Opens the RLVa console window
• Restrictions: Opens the Active RLV Restrictions window
• Strings: Opens the RLVa Strings window

Please use with caution

This menu is toggled via the Ctrl-Alt-D key sequence, or from Preferences→ Advanced

• Rebake Textures (Ctrl+Alt+R): (same as Avatar→ Avatar health → Force Appearance Update).
• Refresh Attachments:
• Set UI Size to Default: Reverts any changes made in Preferences→ User Interface -> General→ UI scaling.
• Set Window Size: Allows you to set the window size.
• Limit Select Distance: Limits your select distance to about 50m.
• Disable Camera Constraints: Allows camera to pass through solid objects.
• High-res Snapshot: Enables high resolution snapshots.
• Quiet Snapshots: Disables the snapshot sound and animation.
• Performance Tools: Opens the Performance Tools sub menu where you can enable:
  • Lag Meter: Opens the Lag Meter window.
  • Statistics Bar (Ctrl-Shift-1): Displays the Statistics window (often called the “stats bar”).
  • Scene Load Statistics (Ctrl-Shift-2): Displays the Scene Load Statistics window with focus on object load and cache performance.
  • Show Avatar Complexity Information: Displays an indicator of client draw “cost” above each avatar (replaces Avatar Rendering Cost).
• Highlighting and Visibility: Opens the Highlighting and Visibility sub menu where you can choose:
  • Cheesy Beacon: Animates the red world map beacon to make it look “cheesy” (enable it to see the effect).
  • Hide Particles (Ctrl Alt Shift =) : Disables rendering of particles. Another way of achieving this is to go to Preferences→ Graphics -> General and setting Max particle count to zero - or doing the same in the Quick Preferences panel.
  • Hide Selected: Makes the currently selected (edited) object invisible, until they are no longer selected.
  • Highlight Transparent (Ctrl Alt T): Makes transparent objects visible by highlighting them in red.
  • Show Mouselook Crosshairs
  • Hover Tips: Opens Hover Tips submenu
    • Show Tips (Ctrl-Shift-T): This allows you to set what hovertips, if any, you see (please check this first to enable hover tips)
    • Show Land Tooltips:
    • Show Tips On All Objects:
• Rendering Types: Opens the Rendering Types sub menu, which allows types of things to be shown or hidden. By default, these are all enabled. Disabling some can be useful if you are trying to find a lost object.
  • Simple (Ctrl-Alt-Shift-1): Textures without alpha channels.
  • Alpha (Ctrl-Alt-Shift-2): Textures with alpha channels
  • Tree (Ctrl-Alt-Shift-3): Linden plants.
  • Avatars (Ctrl-Alt-Shift-4): Bodies and attachments but not name tags.
  • Surface Patch (Ctrl-Alt-Shift-5): Terrain/ground texture.
  • Sky (Ctrl-Alt-Shift-6): Entire sky including clouds and sun/moon.
  • Water (Ctrl-Alt-Shift-7): Water surface only, view when under water is still tinted.
  • Ground (Ctrl-Alt-Shift-8)
  • Volume (Ctrl-Alt-Shift-9): All objects except Linden plants.
  • Grass (Ctrl-Alt-Shift-0): Linden plants.
  • Clouds (Ctrl-Alt-Shift- -)
  • Particles (Ctrl-Alt-Shift-= )
  • Bump (Ctrl-Alt-Shift-\): Legacy bump map and shiny effects.
• Rendering Features: Opens the Rendering Features sub menu:
  • UI (Ctrl-Alt-F1): Be VERY careful when using this, as the menu bar is hidden as well; make mental note of the key sequence so you can re-enable the UI when you need it.
  • Selected (Ctrl-Alt-F2): Display texture alignment crosshair boxes with “Select Face”.
  • Highlighted (Ctrl-Alt-F3)
  • Dynamic Textures (Ctrl-Alt-F4): Enable clothing and sculpt previews in texture upload floater.
  • Foot Shadows (Ctrl-Alt-F5)
  • Fog (Ctrl-Alt-F6)
  • Test FRInfo (Ctrl-Alt-F8)
  • Flexible Objects (Ctrl-Alt-F9): Enable/disable flexible prim effect.
• RLVa: This will menu option will show if chose not to show RLVa menu in top menu bar. This will show RLVa submenus.
• Media Streams Backup
  • Import Stream List XML: This will import the stream_list.xml file.
  • Export Stream List XML: This will export the media stream list from top menu → World Menu → Parcel Details→ Sound tab to a file called stream_list.xml to a folder of your choosing
• Use Plugin Read Thread: Uses a separate thread to read incoming messages from plugins. So in theory, this should give you a slight performance increase if you have a multicore processor and using the internal web browser or playing quicktime videos and so on.
• Clear Group Cache: Clears group cache
• Mouse Smoothing: Should help smooth mouse movement
• Release Keys: Releases permissions taken by worn attachments.
• Shortcuts: Opens the Shortcuts sub menu, showing some of the common keyboard shortcuts:
  • Search (Ctrl-F)
  • Show Advanced Menu-legacy shortcut (Ctrl-Alt-D)
  • DoubleClick Teleport (Ctrl-Shift-D)
  • Always Run (Ctrl-R)
  • Fly (Home)
  • Close Window (Ctrl-W)
  • Close All Windows (Ctrl-Shift-W)
  • Snapshot to Disk (Ctrl-`)
  • Mouselook (M)
  • Joystick Flycam (Alt-Shift-F)
  • Reset View (Esc)
  • Reset Camera Angles (Shift-Esc)
  • Look at Last Chatter (Ctrl-\)
  • Zoom In (Ctrl-0)
  • Zoom Default (Ctrl-9)
  • Zoom Out (Ctrl-8)
• Fly Override (Ctrl-Alt-V): Allows flight in no fly areas - NOT recommended
• RestrainedLove API: Enables/disables RLV (also in Preferences→ Firestorm -> Extras→ Allow scripted viewer controls)
• Show Debug Settings: Opens the debug menu window; use with caution.
• Show Develop Menu (Ctrl-Alt-Q): Shows or hides the develop menu on the menu bar.

Please use with caution

This menu is toggled via the Ctrl-Alt-Q key sequence, or from Preferences→ Advanced

• Consoles: Opens the Consoles sub menu. These should all be disabled in normal use. If you find your screen filling with “strange” graphs and data, check here to make sure all are off.
  • Texture Console (Ctrl-Shift-3):
  • Debug Console (Ctrl-Shift-4): Scroll activity log on the main viewer window.
  • Notifications Console (Ctrl-Shift-5): Trace dialogs, alerts, notifications.
  • Fast Timers (Ctrl-Shift-9): Shows tasks performed per frame.
  • Scene Statistics: Plot complexity of objects in view.
  • Scene Loading Monitor:
  • Region Debug Console Opens the Region Debug Console.
  • Region Info to Debug Console: Dumps region flags and stats to log
  • Group Info to Debug Console: Dumps summary of active group info to log.
  • Capabilities Info to Debug Console: Dumps capability names and URLs to log.
  • Camera: Camera and agent position/rotation overlaid on screen.
  • Wind: Region wind speed and heading is overlaid on screen.
  • FOV: Camera field of view angle overlaid on screen.
  • Badge (Ctrl-Alt-Shift-H) (This won't toggle off……)
• Show Info: Opens the Show Info sub menu:
  • Show Time: Shows the time spent logged on in the lower right.
  • Show Upload Transaction: Gives a notification on upload, showing how much you were charged.
  • Show Texture Info: Shows texture information for the object under the cursor.
  • VRAM usage per object:
  • Show Avatar Render Info: Show load state and attachment weights for visible avatars.
  • Show Render Info: Displays information about the scene currently being rendered.
  • Show Matrices: OpenGL matrix info overlaid on screen.
  • Show Color Under Cursor: Shows the RGBA values for the color under the cursor, in the lower right.
  • Show Memory: Shows total viewer memory use overlaid on screen.
  • Show Private Mem Info: Private pool stats overlaid on screen.
  • Show Updates to Objects (Ctrl-Alt-Shift-U): Displays “clouds” of different colors when objects update.
• Force an Error: opens the Force an Error sub menu. Using any of these will probably crash you. Aimed at viewer developers.
  • Force Breakpoint (Ctrl-Alt-Shift-B)
  • Force LLError And Crash
  • Force Bad Memory Access
  • Force Infinite Loop
  • Force Driver Crash
  • Force Software Exception
  • Force Disconnect Viewer
  • Simulate a Memory Leak
• Render Tests: opens the Render Tests sub menu:
  • Camera Offset
  • Randomize Framerate: Add a random duration sleep with each rendered frame.
  • Periodic Slow Frame: Sleep half a second every 10 frames.
  • Frame Test: Capture buffer and pause.
  • Frame Profile: Dump GL stats to log.
  • Benchmark:
• Render Metadata: Opens the Render Metadata sub menu; these are normally all disabled:
  • Bounding Boxes
  • Avatar Hitboxes
  • Normals
  • Octree
  • Shadow Frusta
  • Physics Shapes
  • Occlusion
  • Render Batches
  • Update Type
  • Texture Anim
  • Texture Priority
  • Texture Area
  • Face Area
  • LOD Info
  • Build Queue
  • Lights
  • Particles
  • Collision Skeleton
  • Joints
  • Raycast
  • Wind Vectors
  • Render Complexity
  • Attachment Bytes
  • Sculpt
  • Texture Size
  • Texture Density
    • None
    • Current
    • Desired
    • Full
• Rendering: Opens the Rendering sub menu
  • Axes: Draw XYZ axis display centered on avatar plus region origin marker.
  • Tangent Basis
  • Selected Texture Info Basis (Ctrl-Alt-Shift-T): Show size and alpha channel presence for faces selected in editor.
  • Selected Material Info (Ctrl-Alt-Shift-M):
  • Wireframe (Ctrl-Shift-R): Show object geometry.
  • Object-Object Occlusion (Ctrl-Shift-O): Optimization, skip rendering objects that are hidden behind others.
  • Advanced Lighting Model: Enable deferred rendering.
    • Shadows from Sun/Moon/Projectors
    • SSAO and Shadow Smoothing: Wikipedia:Screen space ambient occlusion
  • Debug GL: Enable extra OpenGL error checking.
  • Debug Pipeline: Subset of Debug GL.
  • Automatic Alpha Masks (deferred): Force alpha test instead of blend if texture has little transparency (when advanced lighting on).
  • Automatic Alpha Masks (non-deferred): Force alpha test instead of blend if texture has little transparency (when advanced lighting off).
  • Animation Textures: Allows texture to be animated per llSetTextureAnim.
  • Disable Textures: Stop fetching new textures from the network.
  • Full Res Textures (dangerous): Disregard LOD and display all textures at full resolution. Increases network and memory use.
  • Render Attached Lights: Render local light sources on avatar attachments.
  • Render Attached Particles: Render particle systems emitted by avatar attachments.
  • Hover Glow Objects:
• Network: Opens the Network sub menu:
  • Pause Agent: Stop avatar movement updates. Local turns and interpolated motion will still appear.
  • Enable Message Log: Dump every protocol message to log.
  • Disable Message Log: Stop protocol message dump.
  • Velocity Interpolate Objects: When enabled it allows smoothed object motion between updates and for llTargetOmega motion to work. When it's disabled, stops “rubber band” effect at cost of these features.
  • Ping Interpolate Object Positions: Factor ping time into interpolation.
  • Drop a Packet (Ctrl-Alt-L): Simulate loss of a data packet.
• Dump Scripted Camera
• Recorder: opens the Recorder sub menu. This is used to record, and then playback, a sequence of your actions. For example, you can record yourself walking round, then when you play it back, your avatar will repeat that exactly. Useful for machinima.
  • Start Playback
  • Stop Playback
  • Loop Playback
  • Start Record
  • Stop Record
• World: Opens the World sub menu:
  • Sim Sun Override
  • Fixed Weather
  • Dump Region Object Cache: Send object cache statistics to log.
  • Dump Simulator Features to Nearby Chat
• UI: Opens the UI sub menu:
  • Media Browser Test: Opens embedded browser with Viewer URI Name Space test page.
  • Region Restart Test:
  • Web Content Browser (Ctrl-Shift-Z): Opens the internal browser.
  • FB Connect Test: For checking Second Life ShareAPI.
  • Dump SelectMgr: Info about selected objects to log.
  • Dump Inventory: Inventory UUIDs and names to log.
  • Dump Timers: Function call stats to log.
  • Dump Focus Holder: What UI element has keyboard focus to log.
  • Print Selected Object Info (Ctrl-Shift-P): Object details to log.
  • Print Agent Info (Shift-P): Avatar name and camera to log.
  • Double-Click Auto-Pilot
  • Double-Click Teleport
  • Debug SelectMgr: If this and Limit Select Distance are active, dump auto deselects to log.
  • Debug Clicks: Mouse button changes with coordinates to log.
  • Debug Views: Identify UI elements on screen.
  • Debug Name Tooltips: Identify XUI source for UI element under cursor. (alias of Show XUI Names)
  • Debug Mouse Events: Info about what has mouse focus to log.
  • Debug Keys: Text entry field activity to log.
  • Debug Window Process: Low level info for main viewer window to log.
• XUI: opens the XUI sub menu:
  • Reload Color Settings: Refresh from skin's colors.xml
  • Show Font Test: Open floater with type specimen.
  • Load from XML
  • Save to XML
  • Save XUI Names: Identify XUI source for UI element under cursor.
  • Show debugging info for views
  • XUI Preview Tool
  • Send Test IMs: Send dummy messages to test accounts.
  • Flush Names Caches: Clean avatar name cache.
• Avatar: Opens the Avatar sub menu:
  • Grab Baked Textures
    • Iris
    • Head
    • Upper Body
    • Lower Body
    • Skirt
  • Character Tests
    • Appearance To XML: Saves your avatar shape to a file; opens a file picker to allow you to select the destination folder, and file name. Shapes exported this way can be re-imported in the Appearance window.
    • Toggle Character Geometry
    • Test Male: Shortcut to wear “Male Shape & Outfit” from inventory Library/Clothing.
    • Test Female: Shortcut to wear “Female Shape & Outfit” from inventory Library/Clothing.
    • Allow Select Avatar: Avatars can be selected and “moved” with object editor, local effect only, movements do not appear to others.
  • Animation Speed
    • All Animations 10% Faster
    • All Animations 10% Slower
    • Reset All Animations Speed
    • Slow Motions Animations
  • Force Params to Default: Clear and refresh tweakable appearance settings.
  • Animation Info: Text over avatars with running animations and priorities.
  • Show Look At: Shows look at crosshairs.
  • Show Point At: Show destination for selection beam as a red crosshair.
  • Debug Joint Updates: Rapid summary of updates to log.
  • Disable LOD: For avatar bodies.
  • Debug Character Vis: Dump avatar and attachment visibility to log.
  • Show Collision Skeleton: Show avatar's “collision volume” joints. Used with fitted mesh and touch/select. Not used with simulator physics.
  • Show Bones:
  • Display Agent Target: Crosshairs with avatar's actual and rendered positions.
  • Dump Attachments: Attachment points, UUIDs, positions, visibility to log.
  • Debug Avatar Textures (Ctrl-Alt-Shift-A): Shows component textures for own avatar.
  • Dump Local Textures (Alt-Shift-M): Avatar texture info to log.
  • Reload Avatar Cloud Particle:
• Compress Images: Select a file and convert to .j2c, results to log.
• Enable Visual Leak Detector:
• Output Debug Minidump
• Console Window on next Run: Opens a window on the next run of the viewer, which shows internal information as the viewer runs. Useful for developers' to debug the viewer. Otherwise, keep this disabled.
• Set Logging level: This allows the level of detail of logging to be changed from the default (Info). The support team might request that you change this if attempting to diagnose a problem; otherwise, it should always be left at default.
  • Debug
  • Info
  • Warning
  • Error
  • None
• Request Admin Status (Ctrl-Alt-G): Request privileges. Only works if you are a Linden.
• Leave Admin Status (Ctrl-Alt-Shift-G)
• Show Admin Menu

It is possible to search the menus for specific words or phrases, by typing into the search bar at the top. For example, typing in the word upload will result in matches on up to four top menu items: Avatar, Build, Advanced and Develop. In short, using search will filter out what is shown in the top menu bar, removing all items except those that contain what you searched for.

Matched items are highlighed in color (you can change the highlight color in Preferences → Colors -> Miscellaneous→ Preferences Search Highlight Color).

To clear the search, and have the Preferences window revert to its normal state, just click the 'x' at the far right end of the search field.

Menu search is enabled (or disabled) in Preferences -> Advanced→ Show Menu Search.

: When hovering your mouse over this symbol, it will open the Graphics Presets window. Please note that this symbol will only show if you have created a graphic preset in Preferences→ Graphics -> General.

“Jellydolls” are a new anti-lag feature created by Linden Labs. You can use this feature to reduce your lag and to protect yourself against graphics-crashing devices worn by others.

For general information about Avatar Complexity (“jellydolls”), please see:

• Torley Linden's short video tutorial:

This will give you a good overview of how jellydolls work and how they can help you. Don't try to find the settings the way Torley describes, since those are the official SL viewer settings! See the rest of this page for the Firestorm settings.

• The official Second Life announcement: https://community.secondlife.com/t5/Featured-News/Why-are-all-these-people-made-of-colored-jelly/ba-p/3031255

• Inara Pey's blog: https://modemworld.me/2016/08/09/firestorm-4-7-9-50527-i-see-jelly-people/

• The Second Life wiki page: http://wiki.secondlife.com/wiki/Avatar_Rendering_Complexity

Please note: the official Second Life pages (above) describe how to find the settings in the official SL viewer. See the descriptions below for how to find them in Firestorm.

• This determines which avatars will appear as jellydolls to you, based on their complexity.
• Go to Preferences → Graphics → General → Maximum Complexity.
• Note: Lowering this slider will decrease your lag and turn more avatars into jellydolls; raising the slider may lag you but more avatars will be fully visible.
• Note: Moving this slider all the way to the right is not advised, as this sets this setting to “No Limit” — which means that no avatars will render as jellydolls to you, but you will be subject to lag and worn graphics crashers.

• Right click on the avatar's name tag and choose from the menu:
  • Render Normally – avatar will be affected by your complexity slider (above)
  • Do Not Render – avatar will be a jellydoll for you
  • Render Fully – avatar will be rendered fully even if over your complexity slider setting
• In the pie menu, these options are under More → More → Render.

Go to the top menu bar> World menu and select Always show Friends normally.

Go to the top menu bar> World menu and select Avatar Render Settings. Here you can change how avatars render for you. Refer to this page for details.

• Go to Preferences → General and set “Show Avatar Complexity,” “Only if too complex,” and “Show own complexity” as you wish.

• This appears in the top right of your screen.
• Go to Preferences → Notifications → Alerts, and move “Warn me if my avatar complexity may be too high” to the “Always show” box or to the “Never show” box, as you prefer.

• This appears in the top right of your screen when you change clothes/accessories.
• Go to Preferences → Notifications → Alerts, and move “Warn me about my avatar complexity changes” to the “Always show” box or to the “Never show” box, as you prefer.

• This shows complexity plus rank and area in hover text over avatars.
• Go to Avatar menu → Avatar Health → Show Avatar Complexity Information
• Note: The height of this hovertext cannot be adjusted.

Go to Avatar → Appearance and look at the bottom right of the window.

Two methods:

• Wear the item and then remove it, noting the change to your avatar complexity in the upper right of the viewer.
• Wear the item. Edit it → in the Build floater, click “more info” → and see the number listed for “Display.”

These are the default settings that determine the threshold at which you view avatars fully rendered or as jellydolls. They correspond with the “Quality and Speed” slider located in Preferences → Graphics → General. When the settings are left at these defaults, avatars whose complexity numbers are below these thresholds will be visible, while avatars with higher complexities will appear as jellydolls to you.

• Low: 35,000
• Low-Mid: 100,000
• Mid: 200,000
• Mid-High: 250,000
• High: 300,000
• High-Ultra: 350,000
• Ultra: 350,000

• Allow Remote Scripted Viewer Controls (aka RLVa or RestrainedLove API): Enables RLVa (Requires restart).
  Documentation on RLV is available here and here.
• Always rez objects under the land group if possible: Many regions are set to only let objects be rezzed by group. When creating an object, the viewer will attempt to set the group of the object if the avatar is in the same group as set for the land.
• Create particle effects when scripts communicate: If this is enabled, when a script “chats”, the object containing the script will appear to generate swirling particles. Disable this option to turn that effect off.
• Deactivate tracking beacon when reaching the targetted avatar (⇐ 3m): Normally, a tracking becon (such as one set via map will vanish once get get within 3m of it; with this disabled, the beacon will remain visible until clicked.
• Disable Login Progress Screens: Disables the black login progress screen.
• Disable Logout Progress Screens: Disables the black logout progress screen.

• Enable progressive draw distance stepping: Enables PDD; the slider allows you to adjust the time in seconds between each draw distance increment.

• Enable LSL-Client Bridge: Enables the Firestorm bridge. See this page for more on what the bridge is and what it does.
• Flight Assist drop-down: The bridge can offer flight assist functionality, if this is enabled. Note that you should not wear any other scripted flight assist if you turn this on, as they will conflict. (Requires the bridge to be enabled.)
  Flight speed can be boosted; you can select by how much.
  Note that the SL flight height limit is now 5000m; below this, a flight assist is not required.

• Block left-click sitting on objects: Some objects are set such that a left click will result in sitting on them rather than touching; enable this if you want to avoid accidentally sitting on such objects. But note that this will prevent all left-click sitting; you will need to explicitly right click and select sit from the menu.
• Allow scripts to show map UI (llMapDestination): Certain teleport systems open the map for teleporting when clicked. Enable this if you wish to allow this feature.
  If you find the world map unexpectedly opening for you at some locations, and re-opening if you shut it, disable this setting temporarily, until you leave that location.

• Revoke Permissions: Removes an object's permission to animate or control your input. If this is not done, the object retains permission to animate your avatar indefinitely¹⁾:
  • Never (original behaviour): Objects will retain permission to always animate your avatar.
  • Revoke on SIT: Revokes permission when you sit on the object.
  • Revoke on STAND: Revokes permission when you stand up from sitting on the object.
  • Revoke on SIT and STAND: Revokes permission when you either sit or stand.
• Texture Lag Protection:
  • Automatically hide large objects with high texture area: Enabling this will cause objects with large texture area to not be rendered. This can be used to combat griefing done via specific objects.
  • Threshold: Sets the threshold area to use; prims over this value will not be rendered. This may cause some normal objects to not display either.
• Enable Spam Protection: These items allow you to protect yourself against various forms of spam, such as might be used in griefing attacks:
  • Max lines in a single message: this is the limit where the spam protection will start blocking messages from that source. ie. anything over this number of lines will be clocked.
  • Max events from same source: indicates the maximum number of events that can be recieved from a single source in 2 seconds before the source is blocked.
  • Sound play requests multiplier:
  • Sound preload requests multiplier:
  • Unblock all spam sources: will unblock anything that was blocked by the spam protection.
• Confirm before paying. Threshold: Shows a confirmation dialog before paying sums over this value. To always show a confirmation, set the value to 0 (zero).

• Amount that Avatar's head follows Mouse: Set both these sliders to zero if you do not want your avatar's head following the mouse cursor for unfocused mouse movement. They do not affect whether your head moves to look at something your camera is focused on.
  • Vertical range that avatar's head follows mouse: Controls how far or how little your head moves up and down to follow the movement of your mouse cursor.
  • Horizontal range that avatar's head follows mouse: Controls how far or how little your head moves left and right to follow the movement of your mouse cursor.
  • Disable random avatar eye movements: As the title suggests.

• Selection beam particle effects:
  • Beam updates/sec: Controls how many particles the stream uses
  • Scale: Width of beam particle effect
• Enable selection beam: Disable/enable the display of the particle beam
• Send selection data to chat: (Formerly called SL Particle Chat). If enabled, selection start/stop information, and global position of an object being selected (edited) are sent on chat channel 9000.

• LSL-Client Bridge external protocol integration:²⁾
  • Allow OpenCollar protocol to enable or disable the built in AO
  • Allow LockMeister protocol to enable or disable the built in AO

• Automatically change environment to use region/parcel settings: If enabled, your WL settings will change if you TP into a region that has windlight region-level windlight settings. This is the same as top menu bar→ World → Environment Editor → Environment Settings→ Always use parcel/region settings.
• Crossfade region environment sky presets changes made from quick prefs: Dynamically transitions sky settings.
• Crossfade region environment water presets changes made from quick prefs: Dynamically changes water settings.

• Use Firestorm Parcel Windlight sharing: Enables parcel level windlight sharing.
  • Auto apply WL settings from friend's land: If enabled the viewer will automatically see the windlight settings (no prompt) on a friends land if set.
  • Auto apply WL settings from my groups' land: If enabled the viewer will automatically see the windlight settings (no prompt) on group land if they are set.
  • Auto apply WL settings from any parcel: If enabled the viewer will automatically see the windlight settings (no prompt)on all parcels with it set by the owner.
  • Crossfade region environment changes for Parcel WL: Allows for dynamic changes between WL settings when a region with WL settings has parcels with their own, different, settings.
• Crossfading duration: You can indicate how long the above crossfade transition effect should last.
• Cloud Texture: You can select a different texture to be used to create Windlight clouds. Select from the drop down list. A relog is mostly likely required after changing.

Please refer to this page for more information on using Windlight with Firestorm.

NOTE: For a video tutorial on setting custom default prim parameters, see here.

Allows you to change parameters of your prim when it is first rezzed.

• x/y/z Size: Sets the size, in meters, of the prim.

Default settings to use for newly created objects.

• Phantom
• Physical
• Temporary
• Material: Lets you choose the default material

Set default texture parameters for newly created objects.

• Texture: Select the default texture to apply to newly created prims. Click to open the texture picker window.
• Color: Click to open the color picker window, to select a default color.
• Alpha: default transparency value.
• Glow: Default value for glow.
• Full Bright: whether full bright should be on by default or not.
• Shiny: A drop down from which you can select the default shiny value.

It is possible to automatically include an item into newly created prims.

• Embed an item into new prims: Enable this to embed items.
  Then drag the desired item (for example, a landmark) into the space marked Drop an inventory item here. Once dropped, the space below will show the name of the item.

Default Creation Permissions Opens a window which allows you to select permissions to be applied, by default, to newly created items of different types. (Same as top menu, Build → Options → Set Default Permissions.))

Allows you to change the pivot point of an object.

• Show axis arrow on root prim position: Moves the axis from the center of the object to the center of the root.
• Values are percent: When enabled the values are percentages.

• Enable LSL Preprocessor: Enables the functionality offered by the LSL Preprocessor. This has a few additional options, if enabled:
  • Script optimizer: Enables the script optimizer
  • Switch() statement: Enables Switch/case statements.
  • Lazy lists Enables Lazy lists.
  • #includes from local disk Allows the use of the #include directive.
  • Preprocessor include path

• Enable highlighting of selected prims: Shows the yellow highlight on prims you select. Deselecting this can increase viewer performance when several prims are selected.
• Highlight boundary of currently selected parcel: When editing an object, this will outline the containing parcel.
  • Show boundary up to maximum build height: When this is enabled, the highlight will be extended up to the max build height (currently 4096m).
• Limit Select distance: Enable this is you wish to limit the distance at which you may select (edit) objects. To the right, you can specify the maximum distance, if this option is enabled.
• Limit drag distance: If enabled, you won't be able to move objects over a distance greater than the limit set to the right. Disable to remove limits.
• Constrain rotations to multiples of: Manual rotations will always “snap” to this number of degrees - when “snap to grid” is disabled.
• Show unlink confirmation dialog if linkset has minimum: When unlinking a linkset, you will be asked for confirmation if there are this many, or more, linked items.
• Use old “Set Object For Sale” behavior: Uses the old style for setting objects for sale. The new behavior safeguards against an object being purchased for the default 10L$ while you are setting the correct price. You click “For sale”, specify the price, then click Apply.
• Save scripts edited from inventory as Mono: Allows you to set that scripts edited in inventory, will compile with Mono rather than LSL2.
• Save textures from inventory to disk as PNG instead of TGA by default: Changes the default image save format, to save you having to change it manually.
• Use Ctrl+mouse to grab and manipulate objects: If this is enabled, pressing Control while left clicking an object, will allow you to move it in-world.
• Allow click-drag or click-scale (together with caps lock) of a texture face in build mode: If this is enabled, you will be able to click and drag - or scale- textures on a prim face. To do this, you need to be in Edit mode on the prim, enable Select Texture then click the prim face that you wish to modify.
• Preview animations on own avatar during upload: If enabled, animations will be played in preview on your avatar when uploading them.

This tab shows default Inventory folders for various types of uploads. In order to change a default upload folder, right click the desired folder in your Inventory window, and select Use as default for, then pick the upload type.

For instructions for Phoenix, please refer here.

Some anti-virus programs will incorrectly flag a viewer - or necessary components of a viewer - as a virus or threat. They may remove the suspected part completely, rendering all or part of the viewer non-functional. There is nothing we can do about this. However, it should be possible for you to tell your anti-virus that the viewer is safe; you will need to whitelist the viewer program as well as some components.

The following is a list of anti-virus software and how to whitelist. Naturally we cannot provide instructions for all existing anti-virus software, and the information here may be outdated. Therefore, it is strongly recommended that you consult the software manual for the specific program you use, for accurate and up to date information.

Here are the steps to follow to reinstall and whitelist a viewer in such as way that the anti-virus program doesn't “mangle” the viewer yet again:

1. Uninstall the viewer normally.
2. Disable the anti-virus software completely (in a few cases, this requires rebooting to make sure that the AV is not running anymore).
3. Reinstall the viewer, but make sure you do not install it back to the default folder suggested; install to a new folder. This step is vital.
4. In your anti-virus program, whitelist the following, per the instructions below (or better, consult the manual for your anti-virus software):
   • the viewer install folder
     • inside this, the viewer itself (firestorm.exe), slplugin.exe, slvoice.exe and llceflib_host.exe (for FS 4.7.9 and later).
   • the viewer cache folder
     • In its default location, the folder is hidden on most OSs. To find it, you will need to show hidden folders. Now you need to locate the cache folder:
       • Windows Vista/7/8/10: C:\Users\[USERNAME]\AppData\Local\Firestorm
       • Mac: /Users/[USERNAME]/Library/Caches/Firestorm
5. Run the viewer to ensure that it is working correctly; do a test of search and voice to ensure that both work, checking that the respective plugins get loaded. Log out of the viewer.
6. Re-enable your anti-virus software and run the viewer again, repeating the tests above.

• Open the Adaware user interface
• Click Scan Computer (second icon from top)
• Go to Manage Exclusions and click View
• Click Add
• Navigate to main Firestorm application folder
• Click OK
• Repeat for Firestorm folders in User/Local and User/Roaming

If you run the “junk files cleanup” function, then Advanced System Care is liable to trash your settings. Further to this, this program can also severely interfere with viewer connection to SL servers, as documented here.

• Open the Avast user interface
• Click Settings
• Click Components
• Click File-System Shield Customize
• Click Exclusions
• Click Add
• Click Browse and navigate to the Firestorm install folder
• Click OK
• Repeat for the Firestorm cache folder
• Click OK all the way out

• Open the AVG user interface.
• Click Tools→Advance Settings.
• Resident Shield→Exceptions.
• The Add the program (or file, directory) you wish to be excluded from scans.

Please see How to add antivirus exclusions (exceptions) in Bitdefender 2018
Also the User Manual, pages 99-100, for how to add exceptions to the Advanced Threat Defence Whitelist.

(derrived from https://community.f-secure.com/t5/Security-for-PC/How-do-I-exclude-a-file-or/ta-p/15398)

• Open Computer Security.
• On the main page of Computer Security, click Settings.
• Select Computer Security > Virus and spyware scanning.
• Select Other settings > Manual scanning.
• Click the Exclude files from the scan link. The Exclude from scanning dialog is displayed.
• Select the Objects tab.
• Select the Exclude objects (files, folders…) check box.
• Click Add.
• Navigate to and select the Firestorm install folder
• Click Add again
• Navigate to and select the Firestorm cache folder
• Click OK to close the Exclude from scanning dialog.

If Gatekeeper prevents you from opening Firestorm, there is a simple workaround: See “How to open an app from a unidentified developer and exempt it from Gatekeeper” on this page. Once you have allowed Firestorm to open via this method, Gatekeeper will not flag it on subsequent launches (until you reinstall Firestorm again).

For a longer-term method, please visit here for a tutorial on whitelisting using the Gatekeeper software.

In order to create an exclusion rule:

• Open application settings window.
• Select Protection on the left.
• Click the Trusted Zone button in the Exclusions block.
• Go to the tab Exclusion rules and click Add.
• Select an exclusion type in the Properties field: Object and/or Threat type.
  • Object
    Click select object and choose a file, folder or a mask to exclude.
  • Select a Component in the corresponding field. The rule will apply to the selected component.
  • Threat type. Click enter threat type to select a file, folder or a mask to exclude.

Rules can apply to the following protection components:

• Virus scan,
• File Anti-Virus,
• Mail Anti-Virus (Kaspersky Anti-Virus 6.0 for Windows Workstations 6.0.4.x only),
• Proactive Defense (Kaspersky Anti-Virus 6.0 for Windows Workstations 6.0.4.x only),
• Web Anti-Virus (Kaspersky Anti-Virus 6.0 for Windows Workstations 6.0.4.x only).

A scan if a disk or folder containing excluded objects scans the entire disk/folder except the excluded objects. Yet you can force scan excluded objects from the contextual menu (by right-clicking).

Also you can create an exclusion rule from within a report window:

• Right-click the report object you want excluded.
• Choose the option Add to Trusted Zone.

An Exclusion rule window will open. Make sure that you are satisfied with the new exclusion rule settings. Object name and threat type fields are assigned automatically on the basis of the report data. Click OK to create the rule.

We do not have specific details for McAfee. Check the McAfee control panel, or visit McAfee Consumer Support

https://support.microsoft.com/en-us/help/4028485/windows-add-an-exclusion-to-windows-defender-antivirus

For Win 10 (possibly also Windows 8.x):

• Open Settings and in the search field at the top right enter defender
• Click the Windows Defender Settings option.
• Exclude the cache
  • Click Add an Exclusion
  • Click Exclude a folder
  • Click in the address bar and type %LOCALAPPDATA% and press Enter
  • Click the Firestorm folder
  • Click the Exclude this folder button
  • Repeat this if you have more than one Firestorm folder (64-bit and 32-bit, for example)
• Exclude the viewer executables
  • Click the Exclude a .exe, .com or .scr process button
  • Navigate to C:\Program Files\Firestorm-Release64
  • Click Firestorm-bin
  • Click the Exclude This file button
  • Repeat this for SLPlugin and SLVoice - and llceflib_host (for FS 4.7.9 and later).
  • Repeat this for 32-bit Firestorm ( C:\Program Files (x86) )

Add exclusion to Auto-Protect and Risk scan

• Start Norton 360.
• Click Settings.
• Click Antivirus Protection.
• On the Scans and Risks tab, under Exclusion/Low Risks, click Configure next to Scan Exclusions.
• Under Scan Exclusions, click Add.
• Browse and select the disk drive or folder or file you would like to exclude and click OK. If you want to include subfolders within the folder, check Include Subfolders.
• Under Auto-Protect Exclusions, click Add.
• Browse and select the disk drive or folder or file you would like to exclude and click OK. If you want to include subfolders within the folder, check Include Subfolders.
• Click Apply > OK.
• Click Apply > Close

Norton Internet Security includes a feature called Download Intelligence. This works such that the user community reports downloads as good or bad. While this may be very helpful, it can also be unfairly detrimental to programs, especially when they are updated as they are then treated as totally new.

Therefore, if you use Download Intelligence, you are urged to disable it before attempting to download any of our viewers, in order to avoid them being incorrectly reported as infected with a virus. Refer to this page for instructions.

• Click on the “Antivirus” section of the UI.
• Click on “Advanced Settings” (bottom of the panel current version)
• Click on “Exclusions” tab
• Choose “Add”, then navigate to your Firestorm installation folder and put a check in the box to the left of slplugin.exe (and llceflib_host.exe for FS 4.7.7 and later), and everything else you want to exclude. Once you've checked something, the “exclude” button at the bottom of the panel is enabled. Click it when you've finished checking off everything you want to exclude.
• Click “OK” at the bottom of the “Exclusions” tab.

See this page for additional Panda tips for whitelisting files and folders: http://www.pandasecurity.com/homeusers/downloads/docs/product/help/is/2012/en/709.htm The page is out of date but the methods may still work.

• Right click PC Tools icon in taskbar → Open
• Go to Settings → Global action list
• Click “Add”, choose “File” & browse to your Firestorm installation folder & choose slplugin.exe - and llceflib_host.exe (for FS 4.7.9 and later).
• This will add the plugin(s) to the global whitelist.

To date (August 2015), there is no way to whitelist the entire cache folder in WebRoot. Therefore WebRoot may continue to cause severe problems including slow rezzing and viewer freezing.

If you test with WebRoot off and find your SL experience greatly improved, the only suggestion we have is to choose another antivirus program.

Some more more info on Webroot and the problems it has been known to cause, see this page.

For additional information:

• https://community.webroot.com/t5/Webroot-for-Business/how-to-set-file-and-folder-exclusions-in-the-webroot-console/td-p/189775
• https://community.webroot.com/t5/Webroot-SecureAnywhere-Antivirus/How-to-exclude-a-folder-from-being-scanned-in-the-latest-WSA-AV/td-p/78063

If you're looking for how to get your own event in the Firestorm Message of the Day, click here.
If you're looking for a missed MotD or more information on the current MotD rotation, keep reading!

Oh hi! I didn't see you come in! You're probably here because you missed the message of the day. It went by to fast, it was to long, or you clicked a link in a goofy motd set up to get you here!

Anyway, if you missed the message of the day and would like to see it again;
At the top of your screen find the “Content” menu and click it.
In the menu that drops down, way down at the bottom select, “Message of the Day”.

There it is, in your local chat as a system message.

[11:28:02] [Firestorm Tip! Did you know you ca… Stop… Wait… Go back… I didn't get to read it all! Grrrr! Clickies! http://wiki.phoenixviewer.com/motd]

You can also scroll down this page and see ALL the current messages of the day in the “events, tips, help and gateway” message of the day rotation. (I keep this page bookmarked as a fast reference to important wiki pages.)

The Firestorm Message of the Day is currently running on a rotation of thirty eight preset tips, help, gateway and fun messages and/or a varying amount of event messages of the day. All of which are displayed at random when you log in depending on which “MotD Cartridge” is loaded. Go ahead, try it, relog, and unless the message of the day is promoting a special event¹⁾ you'll see something different.

The preset messages of the day are split between tips to make your Firestorm Viewer experience more efficient and enjoyable, help topics to help resolve common Firestorm Viewer issues, gateway to spread information about the Firestorm Gateway and fun just because.

I'll list the message of the day presets below so you can see what's in the rotation.

These are the current messages of the day for events which are currently running and have been approved for a Firestorm message of the day;

MOTD: EVENT: LL Double Tier Announcement
Double tier allotment on the mainland?! No way? Get out! It's true, click for more! https://tinyurl.com/LLDoubleTier

MOTD: EVENT: 2018 SciFi Expo Registration
The SciFi Expo in support of The American Cancer Society's RFL SL is now accepting applications for their event running May 12 to 20! CLick to sign up! https://slscifiexpo.wordpress.com

These are displayed randomly and are broken down into three groups;

Tips: Which provide tips on how to get the most out of the Firestorm Viewer and are meant to improve your Second Life experience in some way.

Help: Which provide assistance on self resolving common Firestorm problems which are seen the most in the Firestorm Viewer help groups. These may have also been requested by the Firestorm Support Team at some point.

Gateway: Coming soon! These provide information on what's going on at the Firestorm Gateway, events, event spaces, classes and more.

I'll break them into the same groups below;

MOTD: TIP: Firestorm Classes 1Temporarily removed from the rotation.
Did you know Firestorm has classes on how to use the Firestorm viewer? We even have an open question and answer session after each class! http://wiki.phoenixviewer.com/firestorm_classes

MOTD: TIP: Firestorm Classes 2Temporarily removed from the rotation.
Did you know Firestorm offers classes on how to get the most out of the Firestorm viewer? Click to find out more about these classes and when they are! http://wiki.phoenixviewer.com/firestorm_classes

MOTD: TIP: Avatar Complexity
Firestorm tip! Why is my friend a colored shape? What is this complexity popup thingy? Click here to find out more about this lag reducing feature! http://wiki.phoenixviewer.com/fs_avatar_complexity_settings

MOTD: TIP: Complexity and the Slideshow
Firestorm tip! Are you at a busy club or event and Firestorm is running like a slide show? Try lowering your avatar complexity setting! http://wiki.phoenixviewer.com/fs_avatar_complexity_settings

MOTD: TIP: FS Bridge, Trolls Not Included
Firestorm Tip! The Firestorm BRIDGE is enhancing your SL experience, but you may not even know it! Click here to find out how! http://wiki.phoenixviewer.com/fs_bridge

MOTD: TIP: Can Not Log in to SL
Firestorm Tip! Can't log into Second Life? STOP! DO NOT reinstall firestorm! Save yourself a lot of trouble and check here first for possible grid issues https://status.secondlifegrid.net/

MOTD: TIP: Contact Sets
Firestorm Tip! Contact Sets allow you to organize friends and non friends into manageable groups and categories! Learn more about them at http://wiki.phoenixviewer.com/fs_contact_sets

MOTD: TIP: IM Tab Sorting
Firestorm tip! Did you know you can click and drag your IM tabs in the conversations window to sort them to your liking. For more chat tricks see http://wiki.phoenixviewer.com/fs_chat

MOTD: TIP: Customizable Quickprefs
Firestorm tip! Did you know you can add your most commonly used settings to the Quick Prefs? http://wiki.phoenixviewer.com/fs_quick_preferences

MOTD: TIP: Missed the MotD
Firestorm Tip! Did you know you ca… Stop… Wait… Go back… I didn't get to read it all! Grrrr! Clickies! http://wiki.phoenixviewer.com/motd

MOTD: TIP: Outfits
Firestorm tip! Did you know the Outfits feature can help you quickly change what you're wearing without digging around in your inventory? http://wiki.phoenixviewer.com/my_outfits_tab

MOTD: TIP: Camera Controls
Firestorm tip! Something catching your eye? Hold down your ALT key and click it, then roll your mouse wheel! Interested in more? See http://wiki.phoenixviewer.com/fs_movement_and_camera#view

MOTD: TIP: Toolbars
Firestorm tip! Did you know you can add your commonly used Firestorm windows and floaters to the toolbars? http://wiki.phoenixviewer.com/toybox

MOTD: TIP: SL World Search
Firestorm tip! Looking for something in world but, can't find it? Try a search! http://wiki.phoenixviewer.com/floater_search

MOTD: TIP: Replace Links
Firestorm tip! Gah my inventory links are borkened! Have no fear, Replace Links are here! Fix those broken links, http://wiki.phoenixviewer.com/fs_linkreplace

MOTD: TIP: Skins
Firestorm tip! Wanna change the way firestorm looks? Then change it! http://wiki.phoenixviewer.com/preferences_skins_tab

MOTD: TIP: Settings Backup
Firestorm tip! Better safe than… NOOOOOOO! You should regularly back up your Firestorm settings. You never know when…. http://wiki.phoenixviewer.com/backup_settings

MOTD: TIP: Auto Replace
Firestrom tip! Firestone? Firestorm! If only Firestorm had an auto replace. Oh wait! it does! http://wiki.phoenixviewer.com/fs_auto_correct

MOTD: TIP: Preference Search
Firestorm tip! Is a Firestorm setting playing hide and seek and causing you to pull out your hair? Find it fast with preference search! http://wiki.phoenixviewer.com/fs_preferences

MOTD: TIP: Chat Shortcuts
Firestorm tip! Did you know when chatting you can hold down your ctrl key when you press enter to shout and the shift key to whisper? http://wiki.phoenixviewer.com/keyboard_shortcuts

MOTD: TIP: Keyword Alerts
Firestorm tip! Did you miss a message in chat? Did someone say your name while you were doing something else? Check out Keyword Alerts! http://wiki.phoenixviewer.com/preferences_chat_tab#keyword_alerts_tab

MOTD: TIP: FS Wiki
Firestorm Tip! Did you know Firestorm has its own wiki? Find out how features work, how to fix common viewer issues and more! Check it out, bookmark it, study it! http://wiki.phoenixviewer.com/

MOTD: TIP: Inventory Count
Firestorm Tip! Do you have more inventory than you thought you had? Inventory count now includes folders! Click for more http://wiki.phoenixviewer.com/my_inventory_tab

MOTD: TIP: Elements
Firestorm Tip! Elements? What is this, chemistry class? No silly, Elements is the count of Items/Folders in that folder! Click for more http://wiki.phoenixviewer.com/my_inventory_tab

MOTD: HELP: Bakefail Badness
Firestorm Help! Are you feeling overly misty as an orange cloud? Are you missing your avatar? Are you thinking, clouds belong in the sky, not on me! Click here to fix the cloud http://wiki.phoenixviewer.com/fs_bake_fail

MOTD: HELP: Camera Messed Up
Firestorm Help! HALP! I know my head looks awesome but I'm stuck staring down at the top of it! Why am I staring at my butt? What is wrong with my camera?! click click clickie! http://wiki.phoenixviewer.com/fs_camera

MOTD: HELP: Teleporting Woes
Firestorm Help! What is up with these teleport fails? Disconnected?! OMG again! Click here to help prevent TP issues! http://wiki.phoenixviewer.com/fs_tp_fail

MOTD: HELP: Slow Rezzing
Firestorm Help! Did you know many common rezzing problems can be solved by you? Clickies! http://wiki.phoenixviewer.com/slow_rez

MOTD: HELP: Slow Rezzing Mesh
Firestorm Help! Did you know many common mesh rezzing problems can be solved by you? Clickies! http://wiki.phoenixviewer.com/mesh_issues

MOTD: HELP: Getting Help NAO
Firestorm Help! HALP! My Firestorm is broken and I need help NAO! Have no fear, click here! http://wiki.phoenixviewer.com/getting_help

MOTD: HELP: Getting Help Dont Panic
Firestorm Help! Sudden viewer problems? Not sure what to do? Don't panic! check out our wiki: http://wiki.phoenixviewer.com/getting_help

MOTD: HELP: Voice Issues
Firestorm Help! Have you lost your voice? Firestorm voice not working for you? Why not drink a tall glass of http://wiki.phoenixviewer.com/fs_voice

MOTD: HELP: Rick and Morty Lost Login Info
Oh geez, Rick, Firestorm lost my login info again! Well, Morty, try starting here to fix it, http://wiki.phoenixviewer.com/fs_stored_passwords#failed_to_decode_login_credentials

MOTD: HELP: Help Help Help You
Firestorm Help! Need help? Help us help you! Learn how to use the Firestorm support group to get the best help! http://www.firestormviewer.org/firestorm-help-groups-tips-rules-and-guidelines/

MOTD: HELP: Second Life Account Questions
Firestorm Help! Need help with your Second Life account matters? Go to Avatar Menu - Account, or login to your Dashboard at https://secondlife.com/my/account/

MOTD: HELP: Dont Clear Your Cache
Firestorm Help! Having viewer problems? Please don't clear your cache or reinstall the viewer as the first thing you try. Instead, see this page for how to get help http://wiki.phoenixviewer.com/getting_help

MOTD: HELP: Missing Inventory
Firestorm Help! Ummmm, I know I had more things in my inventory than this! Help! I'm missing inventory! what can I do? http://wiki.phoenixviewer.com/fs_missing_inventory

MOTD: GATEWAY:
Keep an eye here for upcoming information regarding the Firestorm Gateway!

MOTD: FUN: Rhubarb Pie
Firestorm fun! Feeling hungry? try a Rhubarb Pie, Firestorm style! http://wiki.phoenixviewer.com/rhubarb_pie

This section is changing as we speak!

* if a main MOTD is set, that one is always shown
* if random MOTDs are set and no main MOTD is set, they will be randomly shown at login and during TP
* if an event MOTD is set, that is always shown at login and then, during TP either the main MOTD or one of the random MOTDs

If you have certain Intel HD graphics, and have upgraded your PC to Windows 10, your graphics card will not be fully supported by Intel. If you have this issue, you will be unable to log in. You will get the following error dialog box:

This is not a function of the viewer, but instead is a function of the drivers provided by Intel for your computer. However, we have developed a workaround that should help most users with this issue continue to have the ability to use the Firestorm viewer.

1. Verify that your graphics card is one of the affected versions. You can find a table of affected versions here: Graphics Drivers Supported Operating Systems, but most frequently we have seen Intel HD 2000 and Intel HD 3000. You should be able to verify your graphics in the system info of your computer.
2. Below, select the zip file that is correct for your download, either the 32-bit Havok version or the 32-bit OpenSim version, and download it to your computer. You will need to unzip the file and save it on your computer in a location you will remember.
3. On your computer, open File Explorer. (If it isn't on your taskbar you may need to use the search to find it.) When you open it, select the View tab at the top of the page and check the box on the right hand side that says File Name Extensions.
4. In File Explorer, navigate to This PC then Local Disk (C:) (or the location you normally download Firestorm, if it differs) and then navigate to Program Files (x86). Open Program Files (x86), locate the Firestorm folder, and open it. In the Firestorm folder, locate the Firestorm-Release.exe file and delete it.
5. Replace it with the Firestorm.exe file that was in the zipped folder you downloaded from the web site.

You should now be able to run Firestorm on your PC.

• Havok SL
  SHA-1: E72B3C6B99D7DA6C7EA5457D0F48CA79930AB366
• 32-bit non-Havok OS
  SHA-1: 2492C3FA0AC0E3637BDE886DB93637A8F947EF43

• Havok SL
  SHA-1: 78AD19AAFEBA16C9F83229CE6CB9E5A5AF88D7D4
• 32-bit non-Havok OS
  SHA-1: 2990917F75E09A233EAC32F305AB00238B5F6065

• Havok SL
• 32-bit non-Havok OS

So you find yourself suddenly missing a window, perhaps inventory, or chat, or the edit window… How to find it?

• Close all other windows, to make sure it isn't hiding under one of them.

• Hide the chat bar:Preferences→ Chat -> Typing→ Autohide main chatbar, and see if the window is under there.

• Compress all the buttons on the bottom toolbar to the right.
  Alternately, drag the toolbar buttons from their present location onto another toolbar;
  (Reminder: there are three available toolbars: bottom of the screen, right side, and left side. Buttons are dragged by left clicking, holding the left mouse button down, and dragging.)

• Go to Preferences→ User Interface → 2D Overlay, and lower the UI Scaling slider. The default setting is 1.0. You may find that setting it lower, temporarily, will reveal the missing window. If you find the missing window, move it to the center of the screen, then reset UI Scaling to 1.0 or your preferred value.

• Try to ensure that the missing window is closed. Then open the Advanced menu (press Ctrl-Alt-D to enable Advanced, if it isn't already), and go to Show Debug Settings. Then locate the pair values for the default window position, for the window that is “missing”. Consult the table below for the names of these settings. Set both values to 0 (zero), then relog.

• If you already have created a backup of your settings, then try a restore of those settings as explained here.

Should none of these work, then you will have to wipe settings, as explained on this page.

The Firestorm inventory window is accessed by clicking the inventory icon on the bottom button bar.

This will open the inventory window, which is initially docked, but as with all other such windows, may be undocked. A typical inventory window looks like the one below.

• Help: Click the question mark to get help - this page.
• Minimize: The horizontal line will minimize the window on your screen.
• Close: To the right of the redock arrow is an X; clicking this will close the inventory window. To reopen, click the inventory button again, as described above.

• Filter: If you wish to search for items with specific names, type part of the name here. Partial matches work; for example, if you type in hair it will match chair as well as hair. The inventory folders will open and all matching items will be shown, but not others. To remove the filter, click the X that appears at the end of that edit box.

• Collapse: Clicking this will close all open inventory folders.
• Expand: To open all inventory folders, click this button.
• Filter Types Dropdown: You can narrow your inventory search by a single type of content with the dropdown menu. For more detailed filtering, click Custom at the bottom of this menu.

There are three views available in the inventory window; you can toggle between them by clicking the tabs described below:

• INVENTORY: This tab displays your entire inventory in the window.
• RECENT: Clicking this tab will reduce the inventory to showing only recent items. By default, this means all items acquired since last login. This default can be changed - see below.
• WORN: This tab shows only those items in your inventory which are currently worn.

Below these three tabs is your inventory proper. Inventory is organized into a hierarchical tree. By default, the main inventory consists of two folders, which you cannot rename: Inventory and Library. Within Inventory are more folders. Some of these are system folders, meaning they have default and standard uses and cannot be removed or renamed or moved; all other folders here can be manipulated at will. For the most part, this main folder will contain items you accumulate in SL, things you purchase, or make.

The Library folder, on the other hand, is supplied by SL. It contains all manner of things which might be of use. You are free to use items in this folder as you wish, but you may not delete or otherwise manipulate the contents.

If a folder icon has a small arrow to the left, then it contains items; click that arrow to expand the folder. Folders may contain single items or other folders, or a mix of both. Items may be objects, textures, animations, and so on.

If you click on any folder, to the left of the name you will see the number of elements in the folder, that is, actual items, and subfolders. Referencing the image above, the Objects folder shown contains 28 items, and 6 subfolders.

Note that the total displayed (6616 in the image) includes items and folders.

Below the inventory view are more icons:

• Gear: Clicking this icon pops open a menu, shown to the right. The entries in the menu are as follows:
  • New Inventory Window: Open a new inventory window. Note that if you have a lot of items this may take a moment to open.
  • Sort by Name/Most Recent: Sets how you wish folders and items to be sorted in the inventory display.
  • Sort Folders Always by Name: This forces folders to sort alphabetically, regardless of the setting above.
  • Sort System Folders to Top: This places the system folders at the top of the list of folders, with all the others below. System folders include: Animations, Body Parts, Calling Cards, and so on, down to Trash.
  • Search By: Allows you to search inventory according to different fields:
    • Name
    • Creator
    • Description
    • UUID
    • All
  • Add objects on double click: If enabled, double click on an attachment will cause it to be added to its attachment spot; if disabled, it will be worn (meaning any currently worn attachments on that sport will be removed).
  • Add clothes on double click: As above, but for layered clothing, as opposed to attachments.
  • Show Filters: Opens the Inventory Finder, which enables you to limit which items are visible in your inventory, according to item type.
  • Reset Filters: Clears all filters set with Show Filters.
  • Close All Folders: Same as the Collapse button.
  • Empty Lost and Found: Deletes the contents of the Lost and Found folder without moving them to the trash. Use with caution!
  • Save Textures As: Disabled unless a texture is selected in the inventory list. Then it will allow a texture to be saved to your hard drive.
  • Share: Click this to give the selected inventory item(s) or folder(s) to another avatar. A window will open, from which you may select who to give it to. This method is an alternative to dragging the item(s) onto an avatar's profile.
  • Find Original: Disabled unless the currently selected item in your inventory is an inventory link. ¹⁾
  • Find All Links: If clicked when an item is selected, this will show all links to it - if any exist.
  • Replace Links: Used to repair broken inventory links. Refer to this page for more information.
  • Show Links: When enabled, this will display links in inventory.
  • Show Only Links: Filters the list to show links only, hiding all other items.
  • Hide Links: Prevents links from being shown.
  • Empty Trash: Removes the contents of the Trash folder. Use with caution - this cannot be undone! (Same as right clicking the trash folder and selecting Empty trash.)

• +: Creates a new item in the currently active folder. The same options are available by right clicking a folder name.
• Suitcase Icon: This opens a new inventory window, and is thus the same as selecting “New Inventory Window” from the gear menu.
• Total: This shows the total count of elements (items and folders) in your inventory.

The bottom of the inventory window has 3 buttons:

• Profile: This will be disabled unless an item is selected - then, when clicked, it will display the item's properties.
• Share: Allows you to give the selected item(s) to another avatar. Same as dragging the item onto the avatar's profile.
• Marketplace/Wear/Teleport/Play: The third button will change depending on what you currently have highlighted in inventory:
  • Marketplace: If you have a folder, texture or a script highlighted, then it will read Marketplace; clicking it will open the SL Marketplace in your web browser.
  • Wear: The button will show Wear if you have an wearable item, or any object, highlighted.
  • Teleport: Shown if you have a landmark highlighted.
  • Play: This shows on highlighting a gesture or animation.

Inventory can be searched by typing into the white space at the top. As you type, inventory is filtered to show only items that match what has been typed. As described above, you can search by name, creator, description or UUID.

If you want to search on multiple words, separate them with a '+', but without spaces. For example, if you are looking for a landmark that you think contains Firestorm Marina, type in: Firestorm+Marina. This will match (assuming you actually have such a landmark, of course), Firestorm Gateway Marina.

To clear the search field, click the 'x' at the end of the search bar.

Normally, search operates across all tabs in the Inventory window. If you want to use separate searchs on Inventory tabs, then go to Preferences → User Interface → Interface Windows → Allow separate search terms on each tab in inventory.

If you right click any inventory item or folder, you get a menu. This menu will vary depending on context; for example, right clicking a menu will give a different menu that right clicking an item.

• Share: Selecting this allows you to give the selected item to someone else. The avatar selector window opens, allowing you to select the person you want to give it to.
• Open: Certain types of items may be opened or previewed: scripts, notecards, textures, sounds, gestures.
• Properties: This opens the item properties window, where you may view and change select item properties.
• Rename: Allows you to rename the object; only available if the object is modifyable for you. (You can also press F2 to edit an item's name.)
• Copy Asset UUID: Copies the UUID of the object to the clipboard, for some types of item.
• Restore to Last Position: if the item is an object, this will cause it to be rezzed out to its last position in the region. Use with caution! The function doesn't take into account the region name, only coordinates within a region. So do not use it if the object was never rezzed out in the region you are in, unless you are prepared to go hunting for it.

• Copy: Select this to make a copy of an object. You can then use one or both of the following two to paste copies.
• Paste: Paste a previously copied item into the folder which is currently selected. (You cannot make a copy if the item is no copy for you.)
• Paste as Link: Pastes a link to a previously copied item, into the folder which is currently selected.
• Replace Links: Used to repair broken inventory links. Refer to this page for more information.

• Delete: As the name suggests, this deletes the selected item, moving it to your Trash folder.

• Wear: Wears the item on your avatar, replacing any other items which might be already worn in the same spot.
• Add: Wears the item on your avatar, adding it to any other items which might already be worn in the same spot.
• Attach To: Allows you to select a body part on which to wear an object.
• Attach to HUD: Allows you to select an HUD point on which to attach the object.

For the Recent tab only:

• Show in Main View: Highlights the item in the Inventory tab.

• Share: Selecting this will allow you to give the folder (and its contents) to someone else. The avatar selector window opens, allowing you to select the person you want to give it to.
• New Folder: Creates a new folder inside the currently selected one. The name will default to New Folder, and will start off in edit mode so you can rename it.
• New Script: Creates a new, default script in the current folder.
• New Notecard: Creates a new blank notecard in the current folder.
• New Gesture: Creates a new gesture in the current folder.
• New Clothes: Creates a new clothing item in the current folder. Select the type from the sub-menu.
• New Body Parts: Creates a new body part in the current folder. Select the type from the sub-menu.
• Use as default for: Allows you to set the folder as the default folder for uploads of images, sounds, animations or (mesh) models. To view the current default folder settings, look in Preferences→ Firestorm -> Uploads.

• Replace Current Outfit: Removes all attachments and replaces them with the contents of the current folder. If the folder contains body parts *system hair, skin, shape, eyes), any worn ones will also be replaced; if any of the four required body parts are not present in the folder, the currently worn one will remain worn.
• Add to Current Outfit: Adds the items in the current folder to your avatar. Any worn attachments will not be removed. If the folder contains any system body parts, then the worn parts will be replaced (as you cannot wear more than one of each part).
• Wear items: Similar to Replace (described above), except that attachments are not removed if the folder contains no replacement. For example, if you are wearing something attached to the Chest point, and the folder has no object that would attach there, the existing attachment will not be removed.
• Remove from Current Outfit: If you are wearing any of the items in the current folder, they will be removed.

• Rename: Allows you to rename the currently folder. This can also be accomplished by pressing F2, rather than right-clicking it.

• Copy: Select this to make a copy of a folder. You can then use one or both of the following two to paste copies. (Naturally, this will not be available if the item is no copy for you.)
• Paste: Paste a previously copied folder into the folder which is currently selected.
• Paste as Link: Pastes a link to a previously copied folder, into the folder which is currently selected. As with items, this is just a reference.

• Delete: Allows you to delete the selected folder, and everything inside it. The folder is moved to your trash.

Aside from the usual Share option, there is a Cleanup Broken Links option. This will remove any broken links from the folder, without you having to unprotect it, and then manually go through and delete broken links.

With the advent of Direct Delivery, there can now be a new Received items folder or sub-panel in the inventory window. This will appear the very first time you make a purchase from the SL Marketplace, that is sent by Direct Delivery - as opposed to the previous “Magic Box” system.

If you prefer to have this sub-panel displayed as a normal inventory folder, open Preferences→ User Interface -> Interface Windows, and enable Show the Received Items folder in normal inventory.

For more information on Direct Delivery, please see the Direct Delivery FAQ.

The Firestorm inventory window is accessed by clicking the inventory icon on the bottom button bar.

This will open the inventory window, which is initially docked, but as with all other such windows, may be undocked. A typical inventory window looks like the one below.

• Help: Click the question mark to get help - this page.
• Minimize: The horizontal line will minimize the window on your screen.
• Close: To the right of the redock arrow is an X; clicking this will close the inventory window. To reopen, click the inventory button again, as described above.

• Filter: If you wish to search for items with specific names, type part of the name here. Partial matches work; for example, if you type in hair it will match chair as well as hair. The inventory folders will open and all matching items will be shown, but not others. To remove the filter, click the X that appears at the end of that edit box.

• Collapse: Clicking this will close all open inventory folders.
• Expand: To open all inventory folders, click this button.
• Filter Types Dropdown: You can narrow your inventory search by a single type of content with the dropdown menu. For more detailed filtering, click Custom at the bottom of this menu.

There are three views available in the inventory window; you can toggle between them by clicking the tabs described below:

• INVENTORY: This tab displays your entire inventory in the window.
• RECENT: Clicking this tab will reduce the inventory to showing only recent items. By default, this means all items acquired since last login. This default can be changed - see below.
• WORN: This tab shows only those items in your inventory which are currently worn.

Below these three tabs is your inventory proper. Inventory is organized into a hierarchical tree. By default, the main inventory consists of two folders, which you cannot rename: Inventory and Library. Within Inventory are more folders. Some of these are system folders, meaning they have default and standard uses and cannot be removed or renamed or moved; all other folders here can be manipulated at will. For the most part, this main folder will contain items you accumulate in SL, things you purchase, or make.

The Library folder, on the other hand, is supplied by SL. It contains all manner of things which might be of use. You are free to use items in this folder as you wish, but you may not delete or otherwise manipulate the contents.

If a folder icon has a small arrow to the left, then it contains items; click that arrow to expand the folder. Folders may contain single items or other folders, or a mix of both. Items may be objects, textures, animations, and so on.

If you click on any folder, to the left of the name you will see the number of elements in the folder, that is, actual items, and subfolders. Referencing the image above, the Objects folder shown contains 28 items, and 6 subfolders.

Note that the total displayed (6616 in the image) includes items and folders.

Below the inventory view are more icons:

• Gear: Clicking this icon pops open a menu, shown to the right. The entries in the menu are as follows:
  • New Inventory Window: Open a new inventory window. Note that if you have a lot of items this may take a moment to open.
  • Sort by Name/Most Recent: Sets how you wish folders and items to be sorted in the inventory display.
  • Sort Folders Always by Name: This forces folders to sort alphabetically, regardless of the setting above.
  • Sort System Folders to Top: This places the system folders at the top of the list of folders, with all the others below. System folders include: Animations, Body Parts, Calling Cards, and so on, down to Trash.
  • Search By: Allows you to search inventory according to different fields:
    • Name
    • Creator
    • Description
    • UUID
    • All
  • Add objects on double click: If enabled, double click on an attachment will cause it to be added to its attachment spot; if disabled, it will be worn (meaning any currently worn attachments on that sport will be removed).
  • Add clothes on double click: As above, but for layered clothing, as opposed to attachments.
  • Show Filters: Opens the Inventory Finder, which enables you to limit which items are visible in your inventory, according to item type.
  • Reset Filters: Clears all filters set with Show Filters.
  • Close All Folders: Same as the Collapse button.
  • Empty Lost and Found: Deletes the contents of the Lost and Found folder without moving them to the trash. Use with caution!
  • Save Textures As: Disabled unless a texture is selected in the inventory list. Then it will allow a texture to be saved to your hard drive.
  • Share: Click this to give the selected inventory item(s) or folder(s) to another avatar. A window will open, from which you may select who to give it to. This method is an alternative to dragging the item(s) onto an avatar's profile.
  • Find Original: Disabled unless the currently selected item in your inventory is an inventory link. ¹⁾
  • Find All Links: If clicked when an item is selected, this will show all links to it - if any exist.
  • Replace Links: Used to repair broken inventory links. Refer to this page for more information.
  • Show Links: When enabled, this will display links in inventory.
  • Show Only Links: Filters the list to show links only, hiding all other items.
  • Hide Links: Prevents links from being shown.
  • Empty Trash: Removes the contents of the Trash folder. Use with caution - this cannot be undone! (Same as right clicking the trash folder and selecting Empty trash.)

• +: Creates a new item in the currently active folder. The same options are available by right clicking a folder name.
• Suitcase Icon: This opens a new inventory window, and is thus the same as selecting “New Inventory Window” from the gear menu.
• Total: This shows the total count of elements (items and folders) in your inventory.

The bottom of the inventory window has 3 buttons:

• Profile: This will be disabled unless an item is selected - then, when clicked, it will display the item's properties.
• Share: Allows you to give the selected item(s) to another avatar. Same as dragging the item onto the avatar's profile.
• Marketplace/Wear/Teleport/Play: The third button will change depending on what you currently have highlighted in inventory:
  • Marketplace: If you have a folder, texture or a script highlighted, then it will read Marketplace; clicking it will open the SL Marketplace in your web browser.
  • Wear: The button will show Wear if you have an wearable item, or any object, highlighted.
  • Teleport: Shown if you have a landmark highlighted.
  • Play: This shows on highlighting a gesture or animation.

Inventory can be searched by typing into the white space at the top. As you type, inventory is filtered to show only items that match what has been typed. As described above, you can search by name, creator, description or UUID.

If you want to search on multiple words, separate them with a '+', but without spaces. For example, if you are looking for a landmark that you think contains Firestorm Marina, type in: Firestorm+Marina. This will match (assuming you actually have such a landmark, of course), Firestorm Gateway Marina.

To clear the search field, click the 'x' at the end of the search bar.

Normally, search operates across all tabs in the Inventory window. If you want to use separate searchs on Inventory tabs, then go to Preferences → User Interface → Interface Windows → Allow separate search terms on each tab in inventory.

If you right click any inventory item or folder, you get a menu. This menu will vary depending on context; for example, right clicking a menu will give a different menu that right clicking an item.

• Share: Selecting this allows you to give the selected item to someone else. The avatar selector window opens, allowing you to select the person you want to give it to.
• Open: Certain types of items may be opened or previewed: scripts, notecards, textures, sounds, gestures.
• Properties: This opens the item properties window, where you may view and change select item properties.
• Rename: Allows you to rename the object; only available if the object is modifyable for you. (You can also press F2 to edit an item's name.)
• Copy Asset UUID: Copies the UUID of the object to the clipboard, for some types of item.
• Restore to Last Position: if the item is an object, this will cause it to be rezzed out to its last position in the region. Use with caution! The function doesn't take into account the region name, only coordinates within a region. So do not use it if the object was never rezzed out in the region you are in, unless you are prepared to go hunting for it.

• Copy: Select this to make a copy of an object. You can then use one or both of the following two to paste copies.
• Paste: Paste a previously copied item into the folder which is currently selected. (You cannot make a copy if the item is no copy for you.)
• Paste as Link: Pastes a link to a previously copied item, into the folder which is currently selected.
• Replace Links: Used to repair broken inventory links. Refer to this page for more information.

• Delete: As the name suggests, this deletes the selected item, moving it to your Trash folder.

• Wear: Wears the item on your avatar, replacing any other items which might be already worn in the same spot.
• Add: Wears the item on your avatar, adding it to any other items which might already be worn in the same spot.
• Attach To: Allows you to select a body part on which to wear an object.
• Attach to HUD: Allows you to select an HUD point on which to attach the object.

For the Recent tab only:

• Show in Main View: Highlights the item in the Inventory tab.

• Share: Selecting this will allow you to give the folder (and its contents) to someone else. The avatar selector window opens, allowing you to select the person you want to give it to.
• New Folder: Creates a new folder inside the currently selected one. The name will default to New Folder, and will start off in edit mode so you can rename it.
• New Script: Creates a new, default script in the current folder.
• New Notecard: Creates a new blank notecard in the current folder.
• New Gesture: Creates a new gesture in the current folder.
• New Clothes: Creates a new clothing item in the current folder. Select the type from the sub-menu.
• New Body Parts: Creates a new body part in the current folder. Select the type from the sub-menu.
• Use as default for: Allows you to set the folder as the default folder for uploads of images, sounds, animations or (mesh) models. To view the current default folder settings, look in Preferences→ Firestorm -> Uploads.

• Replace Current Outfit: Removes all attachments and replaces them with the contents of the current folder. If the folder contains body parts *system hair, skin, shape, eyes), any worn ones will also be replaced; if any of the four required body parts are not present in the folder, the currently worn one will remain worn.
• Add to Current Outfit: Adds the items in the current folder to your avatar. Any worn attachments will not be removed. If the folder contains any system body parts, then the worn parts will be replaced (as you cannot wear more than one of each part).
• Wear items: Similar to Replace (described above), except that attachments are not removed if the folder contains no replacement. For example, if you are wearing something attached to the Chest point, and the folder has no object that would attach there, the existing attachment will not be removed.
• Remove from Current Outfit: If you are wearing any of the items in the current folder, they will be removed.

• Rename: Allows you to rename the currently folder. This can also be accomplished by pressing F2, rather than right-clicking it.

• Copy: Select this to make a copy of a folder. You can then use one or both of the following two to paste copies. (Naturally, this will not be available if the item is no copy for you.)
• Paste: Paste a previously copied folder into the folder which is currently selected.
• Paste as Link: Pastes a link to a previously copied folder, into the folder which is currently selected. As with items, this is just a reference.

• Delete: Allows you to delete the selected folder, and everything inside it. The folder is moved to your trash.

Aside from the usual Share option, there is a Cleanup Broken Links option. This will remove any broken links from the folder, without you having to unprotect it, and then manually go through and delete broken links.

With the advent of Direct Delivery, there can now be a new Received items folder or sub-panel in the inventory window. This will appear the very first time you make a purchase from the SL Marketplace, that is sent by Direct Delivery - as opposed to the previous “Magic Box” system.

If you prefer to have this sub-panel displayed as a normal inventory folder, open Preferences→ User Interface -> Interface Windows, and enable Show the Received Items folder in normal inventory.

For more information on Direct Delivery, please see the Direct Delivery FAQ.